Palm D Oxygen Analyser
Weighing just 145 grams and fitting perfectly in the palm of your hand, the Palm D Oxygen Analyser is hugely popular with recreational and technical divers alike. Manufactured by Analytical Industries USA, the Palm D is reliable, accurate and affordable.
Arguably the most user-friendly analyser available, your Palm D calibrates at the touch of a button using either air or pure oxygen. Its sensor should last the average diver for up to 36 months, while the 2 AA batteries provide more than 10,000 hours of continuous use. Batteries and oxygen sensor are easy to replace using a screwdriver.
The Palm D’s oxygen sensor automatically adjusts for thermal variations, making it highly accurate in all kinds of operating conditions. To use, slowly open the cylinder valve slightly and hold your Palm D against the valve outlet. Wait until the reading stabilises (about 6 seconds).
- O-ring sealed impact-resistant housing
- 1-touch calibration
- Batteries included (2x AA alkaline)
- Works with DIN and yoke cylinder valves
Caution: Hot and humid environments will reduce sensor and battery life. Do not store your Palm D in your dive bag with wet dive gear. This will cause internal corrosion and damage. Also, to prolong oxygen sensor life, do not leave your Palm D in a hot car during the summer. Finally, always purge the cylinder valve prior to use; this will clear the valve of any debris or moisture which may contaminate your Palm D’s sensor.